Local Management - Rosewill RNX-AC750RT User Manual

Rosewill rnx-ac750rt wireless dual band gigabit router
Hide thumbs Also See for RNX-AC750RT:
Table of Contents

Advertisement

AC750 Wireless Dual Band Gigabit Router
TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value
between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set
value, the router will startup the blocking function immediately.
Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping Packet From LAN Port.
The default setting is disabled. If enabled, the ping packet from LAN cannot access the router.
This function can be used to defend against some viruses.
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by blocking.
4.13.3

Local Management

Choose menu "Security → Local Management", and then you can configure the management
rule in the screen as shown in Figure 4-69. The management feature allows you to deny
computers in LAN from accessing the router.
By default, the radio button "All the PCs on the LAN are allowed to access the Router's
Web-Based Utility" is checked. If you want to allow PCs with specific MAC Addresses to access
the Setup page of the router's Web-Based Utility locally from inside the network, check the radio
button "Only the PCs listed can browse the built-in web pages to perform Administrator
tasks", and then enter each MAC Address in a separate field. The format for the MAC Address is
XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). Only the PCs with MAC address listed can use
the password to browse the built-in web pages to perform Administrator tasks while all the others
will be blocked.
After click the Add button, your PC's MAC Address will be placed in the list above.
Click the Save button to save your settings.
Note:
RNX-AC750RT
Figure 4-69 Local Management
- 87 -
User Manual

Advertisement

Table of Contents
loading

Table of Contents