Wps - Rosewill RNX-AC750RT User Manual

AC750 Wireless Dual Band Gigabit Router
SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.

You can also use the search function to select the SSID to join.
MAC Address (to be bridged) - The BSSID of the AP your router is going to connect to

as a client. You can also use the search function to select the BSSID to join.
Scan - Click this button, you can search the AP which runs in the current channel.

 Key type - This option should be chosen according to the AP's security configuration. It
is recommended that the security type is the same as your AP's security type
WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).

It indicates the index of the WEP key.
Authentication Type - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX). It indicates the authorization type of the Root AP.
Encryption - When WPA is set as the Authentication Type, you can select either TKIP

or AES as Encryption.
Password - If the AP your router is going to connect needs password, you need to fill

the password in this blank.
4.6.2

WPS

Choose menu "Wireless 2.4GHz →WPS", you can the screen as shown in Figure 4-15. This
section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi
Protected Setup) function.
WPS - Enable or disable the WPS function here.

Current PIN - The current value of the router's PIN is displayed here. The default PIN of the

router can be found in the label or User Guide.
 Restore PIN - Restore the PIN of the router to its default.
RNX-AC750RT
Figure 4-15 WPS
- 40 -
User Manual