Login - Bosch DICENTIS Configuration Manual

8 en | First use configuration
Initial setup
–
–
–
–
–
–
4.1

Login

Log in to the web application
1.
2.
2015.03 | V1.0 |
When the DCNM-WAP is used for the first time (or set to factory defaults) the wizard is
shown.
In "Lets get started", select the required language for the web application, and click
setup device.
In "Country", select the country, the date, the time, the time‑zone, and then click next:
– Note: It is illegal to select a country other than the country where the DCNM-WAP is
used!
In "User", define a password for the administrator user, and add a user for daily business
use with the required user rights (see Users, page 17). It is not recommended to use the
administrator user for daily business. Click next.
In "Wifi" the Network name (SSID), WPA2 Key and Host name can be changed. It is
recommended to change the WPA2 Key:
– The length of the Network name (SSID) must be between 1 and 25 characters. The
following characters are allowed: A-Z, a-z, 0-9, _, space.
– The length of the WPA2 Key must be between 8 and 64 characters.
– The length of the Host name must be between 1 and 63 characters. The following
characters are allowed: A-Z, a-z, 0-9, -
– Click setup device to save these changes.
The wizard is completed and the login page is shown.
Enter the correct user name and password, select the required language, and click
Login.
The web interface homepage is displayed. See Web interface application, page 10.
Configuration manual
DICENTIS
Bosch Security Systems B.V.