Getting Started; Setting Up The Power Supply - Phonak ComPilot User Manual

3. Getting started

3.1 Setting up the power supply

1. Select the adapter that corresponds to your country.
US
2. Insert the round corner of the
adapter to the round corner of
the universal power supply
until it is completely inserted.
3. Click the tail of the adapter in
to lock it into place. Make sure
the adapter is securely locked.
To remove the power adapter:
a. Pull back the tab on the universal
power supply and hold.
b. Gently pull the adapter upwards
to remove it from receptacle.
c. Then start over with step 1 (above).
EU UK AUS
2.
3.
b.
a.
9