Making Phone Calls - Phonak ComPilot User Manual

5. Using the ComPilot for phone calls

5.3 Making phone calls

When connected, you will hear the dialing tone
through your hearing aid after approximately 3 seconds.
Using cordless phones (DECT) or older phones with
Headset profile only
If your phone only supports the Headset profile (HSP),
the connection must be initiated manually for outgoing
calls. This often applies to cordless home phones (DECT
standard).
I For these phones, the Audio indicator might not
blink blue even if the phone was paired before.
28
Make sure the ComPilot and
your phone are connected
through Bluetooth as described
on page 56.
Use the phone keypad to
enter the number and press
the phone dialing button.