Phonak ComPilot User Manual page 58

8. More detailed information
8. Your phone may then ask you to enter a passcode. If
so, enter "0000" (four zeros). Some phones may ask
which Bluetooth service you want to enable. Select
"Headset" or, if available, "Stereo Headset".
9. Your ComPilot should now be paired to your phone
and the Audio indicator will stop blinking.
I The pairing process is independent from the neckloop
(it can be plugged in or not).
I It may be necessary to redo the pairing if your
phone's firmware was updated.
How to connect to a phone
Once your phone and ComPilot are paired (see Pairing
a Bluetooth-enabled phone), the phone needs to be
'connected' to your ComPilot before it will actually
send audio signals to it.
This function should also appear in your phone's
Bluetooth menu.
58