Phonak ComPilot User Manual page 59

1. Ensure that the ComPilot is turned ON and the
neckloop is plugged in and worn correctly.
2. Locate the Bluetooth section in your phone menu
and select list of "Paired devices".
3. Locate and highlight your ComPilot and select
"Connect".
4. Confirmation of successful connection is indicated
on the ComPilot by the Audio indicator blinking
blue. Additionally a headset symbol ( ) may appear
on the main screen of your phone.
I The connection between your ComPilot and your
phone will be maintained as long as the two devices
remain on and are within range of each other. If
either device is switched off or moves out of range,
you may need to repeat the connection procedure.
I Some phones may perform the connection procedure
automatically after pairing. We recommend selecting
"Yes" when prompted to allow this device to connect
automatically once the pairing is completed.
Please consult your phone's user guide in the case
where a manual connection is necessary.
59