Module Led Indication - Liebert Nfinity 208 V / 240 V 60Hz User Manual

On every Battery, Power or Control Module are two LEDs to help inform the user of the module status.
Refer to the chart below for Power and Battery Modules:
Status LED Fault LED
(Green) ( Amber)
OFF OFF
OFF ON
FLASHING OFF
FLASHING FLASHING
FLASHING ON
OFF FLASHING
ON OFF
ON ON
ON FLASHING
* If this persists for more than 10 seconds, check to verify the lever is in the down position or the module is faulty.
** If both Green and Amber LEDs are flashing for more than 30 seconds, then re-insert module.

Module LED Indication

Module Status
Module not inserted into frame.
System is OFF.
Module is initializing (max 10 seconds*).
Normal Operation
Module is in start-up qualification mode, or module warning. **
Module failed, is off-line and module control is functioning.
Abnormal operation, re-insert module. If this persists, call Liebert Global
Services at
1-800- 543-2378.
33