Event Log; Alarm Log - Liebert Nfinity 208 V / 240 V 60Hz User Manual

Event Log

One may open the Event Log from the main
menu. By accessing the Event Log, the user
may scroll through the Nfinity's past 255
occurrences in chronological order by pressing
the $ # buttons.
The typical event log screen will display the
event number and reference code on the first
line. The purpose of this code is to assist
factory trained service
troubleshooting. Please make a note of the
code number when contacting technical support.
The second line contains the event description.
The third line will have either more detail about
the event, a serial number indicating as to which
module the event occurred, or be left blank. The
last line will show the date and time the event
occurred.
"
Press to go back to the main menu.
In the event of an event / alarm, the User
Interface LCD will display the last message
regardless of the default screen.
possible event / alarm messages is displayed at
right. If you encounter one of these or other
messages and are unsure of the corrective
action to take, please contact a qualified Liebert
representative at the number listed in the back
of this manual.
For more information regarding events, consult
the troubleshooting section.

Alarm Log

When an alarm sounds, the User Interface LCD
will display a general explanation as to what the
alarm is indicating. These alarms will also be
displayed in the Alarm Log, which will display
the last 32 alarm messages.
messages in chronological order, press the $ #
buttons.
The first line of a typical alarm log screen will
display the reason for the alarm occurrence.
The second line will give a more specific detail
of the occurrence (i.e.; module serial number).
Press
Below is a list of possible events / alarms.
personnel in
A list of
29
"
to go back to the main menu.
Occurrence
Battery EOD
Battery Mod Removed
Battery Module Added
Battery Module Fail
Battery Test Fail
Battery Test Pass
Display Panel Added
Display Panel Removed
Firmware Error
General UPS Fail
Main Control Fail with
redundant control
Max Load Alarm
Power Mod Added
Power Mod Failure
Power Mod Removed
Red. Power Alarm
Transformer Fan Fail
UPS Auto Restart
UPS CANBus Fail
UPS Low Battery
UPS on Battery
UPS on Bypass (auto)
UPS on Bypass (manual)
UPS Shutdown
UPS Shutdown Imminent
Wrong Voltage
To view these
Event Alarm
4
4
4
4 4
4 4
4
4
4
4 4
4 4
4 4
4 4
4
4 4
4
4 4
4 4
4
4 4
4 4
4 4
4 4
4 4
4
4
4 4