Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
This manual contains important instructions that
should be closely followed during installation
and maintenance of this UPS unit and during the
installation and replacement of power and
battery modules.
This product is designed for Commercial /
Industrial use only. This product is not intended
for use with life support and other U.S. FDA
designated "critical" devices.
must not exceed that shown on the UPS rating
label. See Limited Warranty.
WARNING: Lethal voltages may be present
within this unit even when it is apparently not
operating. Observe all cautions and warnings in
this manual.
Failure to do so MAY result in
serious injury or death. Never work alone.
Observe the following precautions when working
with batteries:
§
CAUTION: DO NOT dispose of battery
modules in a fire; the battery module may
explode.
§
CAUTION: DO NOT open or mutilate
batteries; released electrolyte is harmful to
skin and eyes, and may be toxic.
§
CAUTION: A battery can present a risk of
electrical shock and high short circuit
current.
The following precautions should
be observed when working on batteries:
§
Remove watches, rings or other metal
objects.
§
Use tools with insulated handles.
§
CAUTION:
Lead-acid
hazardous
toxic
transport, and recycle in accordance with
local regulations.
Maximum load
batteries
contain
materials.
Handle,
This UPS is designed for use on a properly
grounded (earthed), 208/240 VAC, 60Hz supply,
and is to be installed by qualified personnel.
ELECTROMAGNETIC COMPATIBILITY - The
Nfinity™ UPS complies with the limits for a
Class A digital device, pursuant to Part 15 of
FCC rules.
These limits provide reasonable
protection against harmful interference in a
commercial
environment.
generates, uses, and radiates radio frequency
energy and, if not installed and used in
accordance with the instruction manual, may
cause
harmful
communications.
residential area is likely to cause harmful
interference, which the user must correct at their
own expense.
Operate the UPS in an indoor environment only
in an ambient temperature range of 0°C to
+40°C (32°F to +104°F).
environment,
free
contaminates,
moisture,
gasses, or corrosive substances.
Turn the UPS off and isolate the UPS before
cleaning. Use only a soft cloth, never liquid or
aerosol cleaners. Keep the front and rear vents
free of dust accumulation that could restrict
airflow.
Never block or insert any object into the
ventilation holes or other openings.
This UPS contains user replaceable modules.
No attempts should be made to access the
interior of any module.
section on module replacement.
1
This
device
interference
to
radio
Operating this device in a
Install it in a clean
from
conductive
flammable
liquids,
See troubleshooting
Advertisement
Table of Contents
