Liebert Nfinity 208 V / 240 V 60Hz User Manual page 29

Auto Restart: Automatically restarts once both
delay parameters (battery capacity percentage
and countdown timer) are met.
User Settings: From here one can enter the
UPS ID or adjust the contrast of the user
interface LCD.
Set Date/Time: Allows user to enable DST
(Daylight Savings Time), change the Day, Date
and Time setting on Nfinity. When enabled, the
time will automatically
Savings.
Max Load Alarm Set: Allows an alarm to set
when Nfinity's load reaches a specific level.
UPS Shutdown Delay: Delays UPS shutdown
for specified amount of time after receiving
shutdown command via communications (serial
or SNMP).
27
adjust to Daylight