Table of Contents
Advertisement
Proper Care
Keeping your Liebert Nfinity UPS operating
properly is imperative to optimal performance
and life of the unit. It is recommended that a
certified technician perform preventive and
corrective maintenance. Liebert Global Services
(LGS) is dedicated to ensuring the highest level
of performance and unmatched support for your
Nfinity UPS. Contact an LGS representative at
1-800-LIEBERT
for
services
maximum reliability and system availability.
Scheduled Maintenance
It is recommended the following maintenance is
performed at least monthly:
§
Clean unit
§
Clean / replace filters
§
Verify proper airflow
It is recommended the following maintenance is
performed annually:
§
Verify all power modules are operating
properly.
§
Verify all battery modules are operating
properly.
§
Verify redundancy (if applicable).
Maintenance
Replacing Fan Filters
Nfinity's intake fans contain filters that will need
to be replaced / cleaned periodically, depending
on the surrounding environment.
removing the bottom bezel and noting the
condition of the two filters. If filters are dirty,
replace them by removing the plastic cover over
the filter frame and inserting a new filter in its
place. Use caution when replacing filters when
fans are running.
to
guarantee
The fan filters are washable and can be reused.
To wash filters, place them under a running
faucet (with the dirt side down) to remove dirt
and dust.
drying before reusing.
37
Blot dry with a towel and allow air-
Check by
Advertisement
Table of Contents
