Fuel System Pack; Spare Hardware Pack; Wing Fuel Tank Set (Option) - Carf-Models Ultra Flash Instruction Manual

2 All-thread, M3 x 45mm (elevator linkages)
2 Allen bolt, M3 x 16mm (for fixing ball-links to phenolic horns)
2 Lock nut, M3 (for M3 x 16 bolts in phenolic horns)
8 Allen bolt, M3 x 9mm (servo fixing)
8 Button-head bolt, M3 x 6mm (for fixing angles to servo cover hatches)
2 Aluminium angles (2.6 x 12 x 20 x 21mm) drilled and tapped M3 - left
2 Aluminium angles (2.6 x 12 x 20 x 21mm) drilled and tapped M3 - right
2 Plastic Grommets, 6mm ID. (to protect servo cable at exit from stab)
Quantity Description
1 Hopper tank
2 Allen bolts, M3 x 25mm (for fuel tank caps)
2 Aluminium fuel tank cap sets (Cap and threaded disc)
2 Kerosene Stoppers for fuel tanks (Robart #400)
1 Felt clunk (Webra type #1121)
5 Brass tubes 4mm Ø x 90mm long (for fuel system)
8 Brass tube, barbs (I.D. 4mm x 5mm long)
1 Fuel tubing, clear, 6mm Ø x 1.0 metre (to connect fuse tank to hopper etc)
Quantity Description
2 Phenolic horns
6 Sheetmetal screw, 2.9Ø x 13mm
2 Allen bolt, M3 x 20mm
2 Allen bolt, M4 x 45mm
2 Nut, M3
2 Locknut, M3
2 Button head bolt, M3 x 5mm
4 Washers, M3
4 Washers, M4
1 All-thread, M3 x 125mm
2 T-nut M3
2 T-nut M4
1 Clevise, Steel, M3
1 Ball-link, M3
1 Plastic hinge, flat, 25mm wide.
2 Robart hinges (3mm)
Quantity Description
1 Fuel tank, fibreglass, joined (approx. 1.3 litres)
1 Allen bolt, M3 x 25mm (for fuel tank cap)
1 Aluminium fuel tank cap set (Cap and threaded disc)
1 Kerosene Stopper (Robart #400)
1 Felt clunk (Webra type #1121)
1 Festo straight connector QS-6 or equivalent (to connect to fuselage tank)
1 Festo V-PK-4 bend (for vent tube)
1 Fuel tubing, clear, 6mm Ø x 450mm (to connect wing tank to fuselage tank)
2 Brass tubes 4mm Ø x 90mm long (for fuel system)
4 Brass tube, barbs (I.D. 4mm x 5mm long)

Fuel System pack

SPARE Hardware pack

Wing Fuel Tank Set (Option)

34