Table of Contents
Advertisement
SATA Controller Speed
Sets the maximum speed of SATA controllers, and there are three modes,
Gen1, Gen2, and Gen3.
OROM UI Delay
When this item is enabled, users are able to indicate the delay of the OROM UI
Splash Screen under normal status.
Port 1~6
To enable or disable SATA port 0~5.
Hot Plug
Enable/Disable SATA Hot-Plug
Port 1~6 Device Type
To identify the SATA that is connected to a Solid State or Hard Disk Drive.
Note!
Some OS request to install under AHCI mode so please consult your
local OS vendor for more detailed information. i.e. Fedora and Ubuntu
requests to install under AHCI mode.
.
PCE-5128/7128 User Manual
40
Advertisement
Table of Contents
