Table of Contents
Advertisement
Note!
When you enable Deep Sleep S5, Super I/O needs 10 seconds to
enable this function.
1.9
System Memory
PCE-5128/7128 has two 240-pin memory sockets for (ECC) DDR3 1600 MHz mem-
ory modules with maximum capacity of 16 GB. (Maximum 8 GB for each DIMM)
PCE-5128 supports non-ECC DDR3 memory modules.
PCE-7128 supports ECC and non-ECC DDR3 memory modules.
Note!
Both of PCE-5128 and PCE-7128 do NOT support registered DIMMs
(RDIMMs).
1.10
Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
"open" position. i.e. the handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket. Then press the DIMM module right
down into the socket, until you hear a click. This is when the two handles have auto-
matically locked the memory module into the correct position of the DIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism in the socket.
Note!
Because PCE-5128/7128 supports Intel Active Management Technol-
ogy 9.0(AMT9.0) which utilizes some memory space of channel 0, it's
suggested that the user should not leave channel 0 DIMM slots
(DIMMA1) empty, or it may cause some system abnormality.
1.11
Cache Memory
CPUs supported by PCE-5128/7128 have 8 MB, 6 MB, 3 MB L3 cache memory
sizes.
Note!
Please refer to the Intel CPU data sheet for detailed information.
1.12
Processor Installation
Warning! Without a fan or heat sink, the processor will overheat and cause dam-
age to both the processor and the single board computer. To install a
processor, first turn off your system.
PCE-5128/7128 User Manual
10
Advertisement
Table of Contents
