Install Sd Card - Honeywell THOR VM1 Reference Manual

Vehicle-mounted computer
Hide thumbs Also See for THOR VM1:
Table of Contents

Advertisement

Install SD Card

Equipment Required - User Supplied:
Torquing tool capable of measuring inch pounds
l
#2 Philips screwdriver bit
l
SD card - The following commercially available SD cards are recommended:
l
Transcend ® 2GB Industrial SD card (80X Speed) - TS2GSD80I
o
ATP 4GB Industrial Grade SDHC card - AF4GSDI
o
1. For convenience, the Thor VM1 can be removed from the Quick Mount Vehicle Dock, though it is not necessary.
2. Shutdown the Thor VM1 from the Windows menu.
3. Place the Thor VM1 face down on a stable surface.
4. Using a Phillips screwdriver (not supplied) loosen the screws and then remove the tethered access panel with the SSD
and SD label. This panel is on the left hand side when the Thor VM1 is face down with the top away from the user.
5. Locate the SD card installation slot.
2-36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents