Power Controls; Power Switch; Thor Vm1 Power Button - Honeywell THOR VM1 Reference Manual

Power Controls

Power Switch

Thor VM1 Power Button

After all cables are connected, the Thor VM1 can be powered on.
There is a power switch located on the back of the Quick Mount Smart Dock. The power
switch is a rocker switch.
The power switch has a raised bump to identify the switch position even when it is hidden
from view. When the side of the switch with the raised bump is pressed, the power switch is
On. If the Dock is connected to external power, the Dock delivers power to the Thor VM1.
The power button is located at the bottom left of the
Thor VM1.
If the Thor VM1 is Off, pressing the power button
starts the power up sequence.
Note: This assumes that the Thor VM1 is docked
in a powered Quick Mount Smart Dock or
that the internal UPS battery has a sufficient
charge to power the Thor VM1. If no external
power is available and the UPS battery does
not have a charge, pressing the power button
causes no action.
If the Thor VM1 is On, pressing the power button
performs the option selected in the Advanced tab of
the Power control panel:
Ignore power button press
l
Prompt the user to select action
l
Shut down (default, an orderly shutdown is
l
performed)
Stand by
l
Hibernate
l
2-7