Certificates - Honeywell THOR VM1 Reference Manual

Certificates

Note: Please refer to the Security Primer to prepare the Authentication Server and Access Point for communication.
Note: It is important that all dates are correct on the Thor VM1 and host computers when using any type of certificate.
Certificates are date sensitive and if the date is not correct authentication will fail.
If using the Windows Certificate Store, the Windows Account must have a password. The password cannot be left
blank. The Summit Client Utility uses the Windows user account credentials to access the Certificate Store. The
Windows user account credentials need not be the same as the
Utility.
Quick Start
Root Certificates are necessary for EAP-TLS, PEAP/GTC and PEAP/MSCHAP.
1. Generate a Root CA Certificate
2. If a PC was used to request the certificate, copy the certificate to the Thor VM1.
3. Install the Root CA
User Certificates are necessary for EAP-TLS
1. Generate a User Certificate
2. If a PC was used to request the certificate, copy the certificate to the Thor VM1.
3. Install the User Certificate.
either from the Thor VM1 or using a PC.
Certificate.
either from the Thor VM1 or using a PC.
wireless credentials entered in the Summit Client
4-42