Kwikset Smartcode 914 Programming And Troubleshooting Manual page 6

7. Press "9" six times.
8. Press Lock button once.
If programming is successful, the keypad will flash green once with
one beep.
If programming is unsuccessful, the keypad will flash red three times with
three beeps. Make sure to enter a valid Master Code in step 3 during
your next attempt.
9. Press the Lock button while the door is open. If the latch bolt does not
extend to lock, then all codes have been successfully deleted.
Technical Support
1-866-863-6584
6 / 13
61883 / 01
©2014 Kwikset Corporation