Jumpers And Connectors - Advantech AIMB-502 User Manual

1.4

Jumpers and Connectors

Connectors on the AIMB-502 motherboard link it to devices such as hard disk drives
and a keyboard. In addition, the board has a number of jumpers used to configure
your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Jumpers
Label
JFP1
JFP2
JFP3
JMECLR
JCMOS1
JOBS1 + JWDT1
JSETCOM5/6_V1
JIR1
JCASE1
JME1
PSON1
Table 1.2: Connectors
Label
COM2
COM3/4/5/6
LAN1_USB01
LAN2_USB23
USB89
FPAUD1
LANLED1
AUDIO1/2
VGA1 + DVI1
HDMI1
ESATA1
ISODIO1
CPUFAN1
SYSFAN1/2/3/4
ATX12V1
EATXPWR1
SATA1~2
SATA3~4
SATARAID1~4
MINIPCIELATCH1
SPI_CN1
AIMB-502 User Manual
Function
Power Switch / Reset connector
External speaker / SATA HDD LED connector
Power LED
ME Clear (Reset portions of Intel ME)
CMOS clear (default 1-2 pin)
JOBS Jumper for Watchdog/OBS
COM5_6 Ring selector Jumper setting
Jumper for Irda (Option)
Case open connector
Jumper for update BIOS ME mode
AT(1-2) / ATX(2-3) ( Default 2-3 )
Function
Serial Port COM2, pin header 2x5
COM3/4/5/6 serial port, box header 2 x 20 p
USB Port 0, 1, 2, 3 (USB 3.0)LAN1, LAN2 (Dual GbE LAN Port)
USB port 8-9 (internal 2 x 5 pin header on board)
Front Panel audio connector (FP_AUDIO)
Front Panel LAN Indicator connector
Audio Connector (Line Out, Mic in)
VGA / DVI-D Connector
HDMI connector
External Serial ATA Connector
RS485/GPIO (6 bit) Phoenix connector
CPU FAN connector (4 pin)
System FAN Power Connector (3 pin)
ATX 12V Auxiliary power connector (2 x 2 p)
ATX power connector (2 x 12 p)
SATA connector (support SATAIII)
SATA connector (support SATAII)
SATA connector (support SATAII)
Mini PCIe slot (support mSATA)
SPI flash card pin header (2 x 4p)
4