Mytee 8070 -Lite Instruction Manual page 3

FILL SOLUTION TANK
To fill the solution tank, use a bucket to pour water into
the tank's opening located at the front of the unit. You can
also use the easy faucet fill also located at the front of the
unit. For best results, fill with warm water (140 o F).
ATTACH HOSES
Attach female end of a solution hose to a wand or tool
and the male end to the Mytee-Lite's QD. Then connect
a vacuum hose to a wand and the male Cuff-Lynx™
hose port.
EMPTY SOLUTION TANK
To empty any remaining water in the solution tank, remove
cap which is located at the front of the solution tank.
PUMP SWITCH
After the machine has been plugged into a 20 amp
grounded outlet, turn on pump. Key tool until upholstery
tool releases a steady flow.
3
8070 MYTEE-LITE™