Page 1
M - 3, M - 5, M - 12 & M - 16 M-Series ™ Please read before use. Register your product at www.mytee.com/help Model # M-3 p. 2 M-5 p. 8 Serial # M-12 p. 14 Form # ADM-MSeries M-16 p. 21 General information p. 27 1-12 13655 Stowe Dr., Poway, Ca.
5. Prime valve 10. Solution tank cover 15. Auto pump-out 20. Recovery tank M-3 ITEMS INCLUDED M-3 DUAL CORDS Top cord: Plug into power Vac 1, Pump & Heater 1. Bottom cord: Plug into power Vac 2, Pump-out & Heater 2.
M - 3 M-SERIES™ M-3 VAC/SOL HOSE CONNECTIONS M-3 SWITCHES & PRESSURE GAUGE Switches and Pressure Gauge are located on the plate in front of the machine. The Amber light left of the Pressure Gauge will illuminate when cords are plugged into two separate circuits. To use Before turning on switches, connect hoses to the extractor and a vacuums, turn on Vac 1 and Vac 2 switches.
M - 3 M-SERIES™ M-3 AUTO-FILL & FLOAT M-3 PRIME VALVE & PRESSURE REGULATOR PRIME VALVE 1003/1005 HIGHER PSI PRESSURE REGULATOR LOWER PSI After attaching a garden hose to the Auto-fill inlet, water will fill the Prime the pump by turning the valve to the Prime position for 30 tank to a predetermined level until stopped by the float.
Page 6
M - 3 M-SERIES™ PARTS & PRICING Order parts at: http://www.mytee.com/products/product.php?id=M-3 Part prices are subject to change.
Page 9
M - 5 M-SERIES™ M-5 FRONT M-5 BACK 1. Switch plate 6. Pressure regulator 11. Recovery tank lid 16. Rear cooling fan 2. 2” Male Cuff-Lynx™ 7. Front cooling fan 12. Push handle 17. Dual power cords 3. Female quick disconnect (QD) 8.
Page 10
M - 5 M-SERIES™ M-5 VAC/SOL HOSE CONNECTIONS M-5 SWITCHES & PRESSURE GAUGE Switches and Pressure Gauge are located on the plate in front of Before turning on switches, connect hoses to the extractor and a the machine. The Amber light left of the Pressure Gauge will il- wand or tool.
Page 11
M - 5 M-SERIES™ M-5 AUTO-FILL & FLOAT M-5 PRIME VALVE & PRESSURE REGULATOR PRIME VALVE 1003/1005 HIGHER PSI PRESSURE REGULATOR LOWER PSI After attaching a garden hose to the Auto-fill inlet, water will fill the Prime the pump by turning the valve to the Prime position for 30 tank to a predetermined level until stopped by the float.
Page 12
M - 5 M-SERIES™ PARTS & PRICING Order parts at: http://www.mytee.com/products/product.php?id=M-5 Part prices are subject to change.
Page 15
M - 12 M-12 FRONT M-12 BACK 1. Switch plate 6. Pressure regulator 11. Recovery tank lid 16. Rear cooling fan 2. 2” Male Cuff-Lynx™ 7. Front cooling fan 12. Push handle 17. Dual power cords 3. Female quick disconnect (QD) 8.
Page 16
M - 12 M-12 VAC/SOL HOSE CONNECTIONS M-12 SWITCHES & PRESSURE GAUGE Switches and Pressure Gauge are located on the plate in front Before turning on switches, connect hoses to the extractor and a of the machine. The Amber light left of the Pressure Gauge will wand or tool.
M - 12 M-12 TILE MODE PUMP MODE TILE Press right side of Pump mode button for Tile. The Amber light left of the Pressure Gauge will illuminate when cords are plugged into two separate circuits. In Tile cleaning mode, a 1200 PSI pump will be used. Pump pressure is set using the regulator on the front of the unit. There is no heat in tile mode.
Page 18
M - 12 M-12 AUTO-FILL & FLOAT M-12 PRIME VALVE & PRESSURE REGULATOR PRIME VALVE 1003/1005 HIGHER PSI PRESSURE REGULATOR LOWER PSI After attaching a garden hose to the Auto-fill inlet, water will fill the Prime the pump by turning the valve to the Prime position for 30 tank to a predetermined level until stopped by the float.
Page 19
M - 12 PARTS & PRICING Order parts at: http://www.mytee.com/products/product.php?id=M-12 Part prices are subject to change.
Page 22
M - 16 M-16 FRONT M-16 BACK 1. Switch plate 6. Pressure regulator 11. Recovery tank lid 16. Rear cooling fan 2. 2” Male Cuff-Lynx™ 7. Front cooling fan 12. Push handle 17. Dual power cords 3. Female quick disconnect (QD) 8.
Page 23
M - 16 M-16 VAC/SOL HOSE CONNECTIONS M-16 SWITCHES & PRESSURE GAUGE Switches and Pressure Gauge are located on the plate in front of Before turning on switches, connect hoses to the extractor and a the machine. The Amber light left of the Pressure Gauge will il- wand or tool.
Page 24
M - 16 M-16 AUTO-FILL & FLOAT M-16 PRIME VALVE & PRESSURE REGULATOR PRIME VALVE 1003/1005 HIGHER PSI PRESSURE REGULATOR LOWER PSI After attaching a garden hose to the Auto-fill inlet, water will fill the Prime the pump by turning the valve to the Prime position for 30 tank to a predetermined level until stopped by the float.
Page 25
M - 16 PARTS & PRICING Order parts at: http://www.mytee.com/products/product.php?id=M-16 Part prices are subject to change.
If damage is evident, save the shipping carton so that it can we at Mytee Products Inc. strive to keep you on the cutting edge with superior quality be inspected by the carrier that delivered it. Contact the carrier immediately to file a and technology.
System Maintainer. ® • M-3 – Plug the top power cord into a 20A grounded wall outlet to turn on Vac 1, 6. If brass check valve is stuck, replace valve. Pump and Heater 1. Using a second 20A grounded wall outlet on a separate circuit, 7.
EVENT SHALL MYTEE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, PROPERTY DAMAGES, OR PERSONAL INJURIES. All limited warranties are void for, and Mytee does not warrant in any way, any prod- uct that evidences misapplication, improper installation, abuse, lack of maintenance,...