Mytee Bentley 8314T Instructions For

24.99 ea
$0.99 ea
$0.99 ea
$0.99 ea
Instructions for
$6.99 ea
$9.99 ea
8314T
$0.99 ea
$0.99 ea
20

Dear Customer:

IONAL HEIGHT Congratulations on the purchase of your new Bentley
TMENT COUPLER
the equipment world is becoming more high tech, and we at Mytee Products Inc.
INCLUDED)
strive to keep you on the cutting edge with superior quality and technology.
With simple maintenance the Bentley
for many years to come. Keep in mind that neglect or abuse to the Bentley™ will
cause unneccessary damage and void the warranty. If warranty questions arise,
please get in touch with your distributor from whom you purchased this equipment.
Before first use of your new product, please read this manual thoroughly. Thank
18
you for choosing Mytee®!
17
15
8 16
Parts & Service
Repairs, when required, should be performed by Mytee service personnel or a Mytee
Authorized Service Center using original Mytee replacement parts and accessories.
8
Please specify the Model and Serial Number when discussing your product. For a list
of Authorized Mytee Service Centers, visit our website at www.mytee.com.
Pre-Operation
1. Vacuum and remove debris.
11
12
2. Pre-spray the area if desired.
Operation
1. Attach the vacuum and solution hoses to the wand.
2. Turn on the extractor. If using a heated extractor, be sure to prime the pump before
turning on the heater.
6 5
3. Begin cleaning using a back-and-forth motion.We recommend one wet pass
followed by two dry passes.

After Use

1. Squeeze the spray lever to clear any remaining solution from the hose line.
2. Store indoors. In a clean, dry place.
2. Do not expose to freezing conditions.
Required Maintenance
You must lubricate the bearing mechanism on the wand head monthly (more
often if bearing is subject to gritty waste flow that lodges in the bearing).
Proper maintenance of the swivel mechanism is crucial to function of wand and
preservation of the factory warranty.
Instructions (refer to the Parts List section of this manual):
1. Remove swivel nut (Item #19).
2. Remove the swivel (Item #18) and use a rag to wipe off old grease.
3. Apply new, industrial grease to the swivel (Item #18) and bushing (Item #17).
4. Reinstall the swivel and swivel nut.

Troubleshooting

There is weak or no solution flow.
1. Check to make sure there is solution in your extractor.
2. Inspect the jets to make sure they are not clogged.
FAQs
Q: How much does the Bentley
A: 8 lbs.
Q: Can I customize the Bentley
A: Yes. Please read the instructions on the following page. Please Note: Miscut
tubing cannot be replaced and will void tubing warranty.
Bentley
™
Carpet Wand! The scene of
™
Carpet Wand will give quality performance
™
19
7
9
10
4
Wand weigh?
™
Wand to my height?
™
3
5 4
Carpet Wand
6
1. Comfort wand grip
2. 2" Titanium tube
3. Optional height adjustment
coupler
4. Polished aluminum swivel head
3
After the Vacuum Hose and Solution Hose are attached to the ex-
tractor, connect the Solution Hose to the Male Quick Disconnect, and
the Vacuum Hose to wand tube.
We recommend one wet pass followed by two dry passes. If using a
heated extractor, this allows the machine to heat up more solution.
1
2
8314T Bentley™ Features
1
2
3
4
6
5
5. Spray shields
mytee
NAME DATE
PRODUCTS, INC.
M.LaBarbera 10/2015
DRAWN
858-679-1191
6. Built-in sight window
TITLE:
CHECKED
Bentley
COMMENTS:
7. FeatherTouch™ solution spray
valve
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
SIZE DWG. NO.
C
8314T
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
SCALE: 1:12
PROHIBITED.
SCALE DRAWING
2
Hooking up the Hoses
Cleaning with the Bentley™
D
C
7
B
A
REV
OD
SHEET 1 OF 1
DO NOT
1
x2
ADM-8314T Rev. 06-16