Keyless-Go Start Function - Mercedes-Benz B-Class Electric Drive Operator's Manual

SmartKey
74
For the purposes of activation/deactivation,
the vehicle must not be nearby.
To deactivate: press the & button on
X
the SmartKey twice in rapid succession.
The battery check lamp of the SmartKey
flashes twice briefly and lights up once,
then KEYLESS-GO is deactivated
( page 75).
Y
To activate: press any button on the
X
SmartKey.
or
Insert the SmartKey into the ignition lock.
X
KEYLESS-GO and all of its associated fea-
tures are available again.

KEYLESS-GO start function

General notes
Bear in mind that the drive system can be
started by any of the vehicle occupants if
there is a key in the vehicle.
Changing the settings of the locking
system
You can change the settings of the locking
system. This means that only the driver's door
and the charge socket flap are unlocked when
the vehicle is unlocked. This is useful if you
frequently travel on your own.
To change the setting: press and hold the
X
% and & buttons simultaneously for
approximately six seconds until the battery
check lamp flashes twice (
If the setting of the locking system is changed
within the signal range of the vehicle, press-
ing the & or % button:
locks or
R
unlocks the vehicle
R
The SmartKey now functions as follows:
To unlock: press the % button once.
X
To unlock centrally: press the % but-
X
ton twice.
To lock centrally: press the & button.
X
The KEYLESS-GO function is changed as fol-
lows:
To unlock the driver's door: touch the
X
inner surface of the door handle on the
driver's door.
To unlock centrally: touch the inner sur-
X
face of the door handle on the front-
passenger door or the rear door.
To lock centrally: touch the outer sensor
X
surface on one of the door handles.
To restore the factory settings: press
X
and hold the % and & buttons simul-
taneously for approximately six seconds
until the battery check lamp flashes twice
( page 75).
Y
Mechanical key
General notes
If the vehicle can no longer be locked or
unlocked with the SmartKey or KEYLESS-GO,
use the mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid, the
anti-theft alarm system will be triggered
( page 69).
Y
There are several ways to turn off the alarm:
page 75).
Y
To deactivate the alarm with the key:
X
press the % or & button on the key.
or
Insert the SmartKey into the ignition lock.
X
or
To deactivate the alarm with KEYLESS-
X
GO: press the Start/Stop button in the igni-
tion lock. The SmartKey must be in the
vehicle.