Setting The Position - Mercedes-Benz S-Class Coupe 2015 Operator's Manual

Menus and submenus
242
Graphic Graphic menu in the multifunction display
when the ignition is on.
For further information about ATTENTION
ASSIST, see (
Y
Activating/deactivating Active Lane
Keeping Assist
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
sist sist submenu.
Press a to confirm.
X
Press the : or 9 button to select
X
Lane Keeping Lane Keeping Assist
Press a to confirm.
X
The current selection
tive tive is displayed.
To change the setting: press a again.
X
For further information about Active Lane
Keeping Assist, see (
Head-up display submenu
Switching other displays on/off
You can switch the display of additional infor-
mation on and off in the on-board computer. If
the head-up display (
this will be shown on the windshield.
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Head-up Display Head-up Display
Press a to confirm.
X
Press the : or 9 buttons to select
X
Display Display Content Content.
Press a to confirm.
X
page 211).
Settings Settings menu.
DriveAs‐ DriveAs‐
Assist.
Standard Standard or
page 220).
Y
page 229) is activated,
Y
Settings Settings menu.
submenu.
Switching the navigation messages dis-
play on/off
Press the a button to save the setting.
X
When you switch on the
sages sages display, navigation messages are
shown on the windshield when the head-up
display is activated.
Further information on navigation (see the
separate operating instructions).

Setting the position

You can adjust the position of the head-up
display. This allows you to compensate for
differences in the seat position.
Switch on the Head-up display
X
( page 229).
Y
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
Adap‐ Adap‐
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use the : or 9 button to select the
X
Head-up Display Head-up Display
Press a to confirm.
X
Use the : or 9 button to select the
X
Position Position
Press the a button to save the setting.
X
Press the : or 9 button to set the
X
position from
(low).
Press the a or % button to save the
X
setting.
Using the Memory function, you can save and
call up the position of the Head-up display as
a single memory preset (
Setting the brightness
The brightness of the head-up display is auto-
matically adjusted to the surrounding ambi-
ent light. You can also individually adjust the
brightness of the head-up display.
Navigation Navigation Mes‐
Settings Settings
submenu.
function.
Level +5 +5 Level (high) to
page 116).
Y
Mes‐
menu.
Level -5 -5 Level