Memory Function In The Rear Compartment - Mercedes-Benz S-Class 2020 Owner's Manual

138 Seats and stowing
You can save the following settings for the front
seat:
Seat, backrest, head restraint position and
R
contour of the seat backrest in the lumbar
region
Vehicles with an active multicontour
R
seat:
Side bolsters of the seat backrest
-
Shoulder of the seat backrest
-
Contour of the seat backrest
-
Dynamic function level
-
Seat heating: distribution of the heated sec‐
R
tions of the seat cushion and seat backrest
Driver's side: steering wheel position and
R
position of the outside mirrors on the driver's
and front passenger sides
Head-up display (depending on vehicle equip‐
R
ment)
Operating the memory function
Storing
Set the seat, the steering wheel, the head-up
#
display and the outside mirror to the desired
position.
Press the V button and then release it.
#
Press one of the preset position buttons
#
4, T or U within three seconds.
An acoustic signal sounds. The settings are
stored.
To call up: press the preset position button
#
4, T or U.
The seat is moved to the stored position.
After releasing the button, the front seat,
outside mirror, head-up display and steering
column continue to move into the stored
position automatically.
% Driver's seat: to call up a stored position
while driving, you must press and hold the
preset position button.

Memory function in the rear compartment

Function of the memory function in the rear
passenger compartment
Operating the rear seat
Rear seat settings for up to three people can be
stored and called up using the memory function
in the rear compartment.