Start Here - NETGEAR Sb 104 Installation Manual

Start Here

This kit includes everything you need to network two Pentium PCs running
®
Windows 95 or Windows 98 and to share files, printers, CDs, and applications.
The kit is expandable to add users and can be upgraded for 100 megabits per
second (Mbps) operation. The same network cards, desktop software, and cables
are used when upgrading to 100 Mbps; only the hub has to be changed.
These five easy steps provide information for installing and using your network:
1. Verify Package Contents
2. Install the Hub
3. Install a Network Card in Each PC
4. Connect the Network Cables
5. Install the Windows Network Driver
As a last step, be sure to fill out and send in your warranty card.
You can also send your warranty and registration information using the Internet.
Log in to www.gearguy.com/pub and complete the Web form as directed.
Model SB104 10 Mbps Network Starter Kit Installation Guide