Installation Procedures; Connect To The Network - NETGEAR ND508 Installation Manual

Installation Procedures

Connect to the Network

To connect your Model ND508/ND520 Network Disk Drive to the network:
1. Connect one end of a Category 5 10/100 UTP Ethernet cable to the RJ-
45 connector on the front panel of the Model ND508/ND520 Network
Disk Drive.
2. Connect the other end of the Ethernet cable to a network hub port, as
shown in the example below.
Model ND508/ND520
Network Disk Drive
10 Gbyte Network Disk Drive
DUAL SPEED HUB DS108
Pow Col
Model DS108
hub
Key
Model ND508/ND520 Network Disk Drive Installation Guide
Network Disk Drive
yte
MODEL SS510
Auto 10/100 Mbps DUAL SPEED
DUAL SPEED
Auto 10/100 Mbps
DUAL SPEED HUB
PCs
10 Mbps
100 Mbps
MODEL SS510
Auto 10/100 Mbps DUAL SPEED
DS108 DUAL SPEED
Auto 10/100 Mbps
9219FA