Winnebago 2015 Journey Operator's Manual page 46

SECTION 3 –
DRIVING YOUR MOTORHOME
3. Remove screws around perimeter of plywood
panel. Remove panel and set aside.
4. Remove screws around perimeter of plywood
frame. Remove frame and set aside.
5. Remove screws around perimeter of plywood
engine cover panel.
3-20
• Forward Engine Access
Cover
6. Remove Forward Engine Access Cover and
set aside.
• Remove Forward Engine
Access Cover
7. Reverse steps to reinstall engine access cover
and bed board.
Rearward Engine Access Cover (Beneath
head of bed)
In some cases, you may need further access of
the rear engine (beyond removing the Forward
Engine Access Cover, as previously described.)
A Rearward Engine Access Cover is located
beneath the head of the bed.
If you have an air mattress with the pump
installed below the bed, proceed with the
following instructions.
If you have an air mattress with an internal
pump, unplug the pump and remove the mattress
then proceed to step 4.
If you have a standard mattress, remove the
mattress from the bed and proceed to step 4.