Programming; Change The Master Code - CODELOCKS CL1200 Programming & Operating Instructions

The Cabinet Lock has been designed so an external PP3 battery can be placed against the
external contacts beneath the handle so that the lock can be opened to replace batteries should
they fail.
The procedure is as follows:
Place the contact points of the PP3 battery against the contact points at the base of the
lock, making firm maintained contact.
The positive + PP3 terminal against the + contact on the lock, and the negative – PP3
terminal against the negative contact on the lock. See image.
Enter the Master Code.
The lock will now withdraw the locking pin allowing the lock to open.
Fit new batteries by removing the upper fixing bolt and swinging the lock down over the
edge of the door. Refit the lock.

PROGRAMMING

To program – the lock must be in the open position with the
program command must commence by pressing the
Master Code, Sub-Master Code or User Code.
Master Code Commands

CHANGE THE MASTER CODE

Master Code
Example: 11335577
Result
Master Code has been changed to 12345678
• •
01 New Master Code
• •
01 12345678
badge button, followed by the
•
New Master Code
• ••
12345678
badge button visible. Every
••