Page 1
Codelocks Support CL100/CL200 - 2018 Code Change Instructions Control and Convenience CL100 and CL200 locks can be used at home on doors, garages and garden sheds, and at work in offices, workshops and storerooms requiring restricted access. Available in Silver Grey, Polished Brass and Stainless Steel.
Page 2
1. Remove the CL100 or CL200 lock from the door by unscrewing the 2 screws in the back plate. 2 Press the ‘C ’ button to reset the chamber and place the lock case on a flat surface with the buttons down https://codelocks.zohodesk.eu/portal/en/kb/articles/cl100-cl200-2018-code-change-instructions...
Page 3
7. Check the operation of the new code, and make a written note of it before re-installing the lock. 8. Insert the spindle, with the spring on the code side. On latchbolt locks the spindle must engage the latch as follows: https://codelocks.zohodesk.eu/portal/en/kb/articles/cl100-cl200-2018-code-change-instructions...
Page 4
A silicone spray or similar, should be used to provide a protective film against grit and grime. Guarantee If any Codelocks mechanical lock should develop a fault, at any time due to manufacturing, just call the Codelocks helpline and arrange for it to be repaired free of charge. ...
Need help?
Do you have a question about the CL210 and is the answer not in the manual?
Questions and answers