Connection - Kenwood KMM-BT32U Instruction Manual

Wiring connection
Microphone input jack
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit.
Fuse (10 A)
( 11)
White
White/Black
Gray
Light blue/yellow
Gray/Black
(Steering remote control
wire)
Green
Green/Black
Purple
Brown
Purple/Black
(Mute control wire)
Red (Ignition wire)
Blue/White
Yellow (Battery wire)
(Power control wire/
Antenna control wire)
Rear, front, subwoofer output
Antenna terminal
If no connections are made, do not let the wire come out
from the tab.
(Not used)
To connect the Kenwood navigation
system, refer your navigations
manual
To the power control terminal when
using the optional power amplifier
or to the antenna control terminal
in the vehicle
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
23
ENGLISH