Colubris Networks CN3000 Administrator's Manual page 70

Chapter 4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Scenarios - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 4
2. Use the default settings for all other parameters.
Configure the Internet connection
Network > Ports > Internet port
1. Select the addressing option supported by your ISP and click Configure.
2. Define all settings as required by your ISP.
Enable the firewall
Security > Firewall
Select the Preset firewall with Security level set to High.
Enable local mode
Wireless > Security > Authentication
1. Disable CN3000 RADIUS authentication.
2. Enable HTML-based user logins and select Local authentication.
Define the local user list
Security > Users
Add usernames and passwords for all users.
Test the public access interface
To test your installation, use a wireless client station to log onto the public access
interface. (For this to work, the CN3000 must be configured as the client's default
gateway. This is done by default if the wireless client is using DHCP.)
1. Start the client station's web browser and enter the IP address (or domain name) of
2. The CN3000 should intercept the URL and display the Login page. (Depending on
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 70 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
(page 253)
(page 268)
a web site on the Internet.
the type of certificate that is installed on the CN3000, you may see a security
warning first.)
(page 228)
(page 269)