Standard Radius Attributes - Colubris Networks CN3000 Administrator's Manual

Chapter 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Customizing CN3000 and customer settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 7

Standard RADIUS attributes

The CN3000 supports the following RADIUS attributes. (Attributes starting with MS are
Microsoft and are not standard.)
Interim accounting updates
To enable interim accounting updates for each customer you must define a value for the
RADIUS attribute Acct-Interim-Interval. This sets the frequency with which the CN3000
will send accounting information to the RADIUS server.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 145 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Access Request
• Acct-Session-Id
• NAS-Port
• NAS-Port-Type
• User-Name
• Calling-Station-Id
• Called-Station-Id
• Framed-Ip-Address
• User-Password
• CHAP-Password
• CHAP-Challenge
• MSCHAP-Challenge
• MSCHAP-Response
• MSCHAPv2-Response
• EAP-Message
• State
• NAS-Identifier
• NAS-Ip-Address
• Framed-MTU
• Connect-Info
• Service-Type
• Message-Authenticator
Access Accept
• MS-MPPE-Recv-Key
• MS-MPPE-Send-Key
• EAP-Message
• Class
• Idle-Timeout
• Session-Timeout
• Acct-Interim-Interval
• Reply-Message
• Tunnel-type
• Tunnel-medium-type
• Tunnel-private-group-id
• Termination-Action
Access Reject
• MSCHAP-Error
• Reply-Message
• EAP-Message
Access Challenge
• EAP-Message
• State
Accounting Request
• User-Name
• NAS-Port
• NAS-Port-Type
• NAS-Identifier
• NAS-Ip-Address
• Acct-Status-Type
• Calling-Station-Id
• Called-Station-Id
• Acct-Event-Timestamp
• Acct-Delay-Time
• Acct-Session-Id
• Acct-Authentic
• Acct-Session-Time
• Acct-Input-Octets
• Acct-Input-Gigawords
• Acct-Input-Packets
• Acct-Output-Octets
• Acct-Output-Gigawords
• Acct-Output-Packets
• Acct-Terminate-Cause
• Class
• Framed-Ip-Address
Accounting Response
• No attribute