System Time - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11

System time

Open the Management > System time page.
Set time zone and DST
System time
Choose the time zone the CN3000 is located in. You can also enable support for
daylight savings time. If you change the time zone setting, the new value does not take
effect until you restart the CN3000.
Set date and time (manually)
Use this option to manually set the system date and time.
Set date and time (time server)
Choose this option to have the CN3000 periodically contact a network time server to
update its internal clock. Time servers are checked in the order they appear in the list.
Use the Add and Delete buttons to define new servers or remove existing servers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 284 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -