Snmp; Attributes - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11

SNMP

Open the Management > SNMP page.

Attributes

System name
Specify a name to identify the CN3000. By default, this is set to the serial number of the
CN3000.
Location
Location where the CN3000 is installed.
Contact
Contact information for the CN3000.
Community name
This is the password that controls access to the SNMP information. A network
management program must supply this password when attempting to set or get SNMP
information from the CN3000.
Read-only name
This is the password that controls read-only access to the SNMP information. A network
management program must supply this password when attempting to get SNMP
information from the CN3000. By default, this is set to public.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 282 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -