Network Address Translation (Nat) - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11
Network If you enable NAT, it effectively hides the addresses of all local computers so that they
are not visible on the other side of the PPTP connection.
Address
If you disable NAT, then the appropriate IP routes must be added to send traffic through
Translation
the tunnel.
(NAT)
Note: This setting does not affect traffic on the Internet port.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 257 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -