Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11
GRE tunnel definition
Open the Network > GRE > Add New GRE Tunnel page.
Tunnel settings
If you enable GRE tunnelling the CN3000 will restart when you click Save.
Note: If you enable one or more GRE tunnels, you must make sure to restart the
CN3000 any time you make a change to any parameter on any page in the
management tool.
Name
Tunnel name.
Local tunnel IP address
Specify the IP address of the CN3000 inside the tunnel.
Remote tunnel IP address
Specify the IP address of the remote device inside the tunnel.
Tunnel IP mask
Specify the mask associated with the IP addresses inside the tunnel.
GRE peer IP address
Specify the IP address of the remote device that terminates the tunnel.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 241 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -