Step 1: Install Software On Server 1; Windows 2000; Steel-Belted Radius; Internet Explorer - Colubris Networks CN3000 Administrator's Manual

Chapter 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Steel-Belted Radius - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 15

Step 1: Install software on Server 1

Windows 2000

1. Install Windows 2000 Professional, Server, or Advanced Server and then install
2. Disable the IAS and IIS services on Windows 2000 Server, or Advanced Server.
3. Connect Server 1 to the hub and assign a static IP address to it. For this example,
4. Shut down and restart Server 1.
Steel-Belted 1. Retrieve Funk Steel Belted Radius Server v4 Evaluation version, from funk.com.
2. Run the executable installation file and accept all default installation settings. When
Radius
Important
If you encounter the following error message when trying to start the Steel-Belted
Radius NT Service:
Services:
Refer to Tech Note RD230 on the Funk web site for a solution.

Internet Explorer

Install Internet Explorer 6 SP1 on the server. The support files included with this
application are required for proper operation.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 335 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Pack 3. Make sure you also install all recommended updates.
This is required to avoid conflicts with Steel-Belted Radius and Apache.
use the address 192.168.2.99.
prompted, select the 30 day trial.
Error 1068: The dependency service or group failed to start.