Default User One-To-One Nat; Ipass Login Url; Internal Pages - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11
Where:
Default user
This attribute lets you define the default setting for one-to-one NAT support for all
customers that do not have a this setting specified in their profile.
one-to-one NAT
Syntax
default-user-one-to-one-nat= value
Where:

IPass login url

This attribute let you define the location of the IPass login page. The CN3000 will
automatically redirect customers with IPass client software to this page.
Syntax
ipass-login-url= URL_of_page
Where:

Internal pages

Internal pages are resident on the CN3000. You have the option of using the default
pages supplied with the CN3000 or replacing them with customized pages of your own
design.
Login
login-page= URL_of_page [placeholder]
Required.
Not required if a remote login page is being used.
Transport
transport-page= URL_of_page [placeholder]
Required.
Session
session-page= URL_of_page [placeholder]
Required.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 276 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Parameter Description
Specify the maximum amount of time a customer session
seconds
can be connected. Once this time expires, the session is
automatically terminated. A value of 0 means no timeout.
Parameter Description
Set this to 1 to activate one-to-one NAT support.
value
Parameter Description
Address of the IPass login page.
URL_of_page