Step 6: Install And Configure Software On Server 2 - Colubris Networks CN3000 Administrator's Manual

Chapter 14 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Backend software - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 14

Step 6: Install and configure software on Server 2

Server 2 will be used to test if the customer is successfully redirected to the originally
requested page.
1. Install Windows 2000 Professional, Server, or Advanced Server, and then install
2. Make sure that IIS is running.
3. Connect Server 2 to the hub and assign a static IP address to it. For this example,
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 317 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Pack 3.
use the address 192.168.2.100.