Getting Started; Installing The Battery In The Telephone; Charging Your Telephone Battery - Alcatel-Lucent 500 DECT Handset OmniPCX Office User Manual

Getting started

Installing the battery in the telephone

2.1
Installing the battery in the telephone
Before inserting the battery
module into the phone, make
sure that its lock is in the
unlocked position
To remove it
Slip the lock to the unlocked
position

Charging your telephone battery

2.2
It is important to fully charge your phone before using it for the first time.
Connect the charger and place the telephone in the
charging holder ;. The battery charger LED lights.
The battery LED is in charging mode on the phone
screen.
If the battery is completly discharged, a charging
time of several minutes is required before the set will
light up again.
Other
While maintaining the
battery module in position,
slip the lock to the locked
position
Lift the battery module from
the bottom
A charging location in the back of the charger is
dedicated for loading an extra battery :
Open the protection cover in the back of the
charger
Place the battery in the dedicated location
An LED indicates that the battery is properly
installed and is charging
6
3
Check that the battery module
is properly installed in its
housing
3
You can then remove the
battery module
2