Receiving A Second Call; Transferring A Call; Setting Up A Conference - Alcatel-Lucent 500 DECT Handset OmniPCX Office User Manual

Receiving a second call

4.5
The operation of your phone depends on its single or multi-line installation. Contact your installer to know which
feature description must be used on your installation.
You are in conversation and a caller is trying
to contact you: Display the callers identity
You wish to take the call immediately:
Single-line set
Multiline set
Answered incoming calls
The first call is on hold
Switching between calls (Broker call)
Single-line set
Multiline set
Recover the call on hold
CLR

Transferring a call

4.6
After dialling the destination number, you can transfer the call directly without waiting for your caller s reply by
validating the Transfer option.You can initiate the transfer by using the icon or the Transfer text.The transfer
between two external callers and the transfer by pressing the hang-up key depend on the system configuration.
You are in communication with a first caller
The two callers are connected
CLR

Setting up a conference

4.7
You are in communication with a first caller. A second caller is on hold.
Enter the feature code: Three-way conference
You are in conference mode
Use the same procedure to cancel the conference and recover the first call.
Enter the feature code
Enter the feature code
Switch from one call to the other
Hang up
Calling a second person during a conversation
Hang up the ongoing call
16