Registering The Telephone; Subscribing The Handset To A Dect System - Alcatel-Lucent 500 DECT Handset OmniPCX Office User Manual

Registering the telephone

Subscribing the handset to a DECT system

7.1
You must subscribe the handset to at least one DECT system before you can use the handset to make a call.
You need to contact the system administrator to configure company directory access.
The handset can operate with a maximum of four DECT systems
When the handset is not yet subscribed to a system, the following message appears on the display screen:
Register.
Before you subscribe to a DECT system, obtain the following information from your system administrator:
PARK code: Use a PARK code system ID only if more than one DECT system overlaps in your location.
DECT system name: The name of the system to which you subscribe. After you enter the system name, it
appears on the idle display.
Phone number: The local phone number assigned to your DECT handset.
When entering text, you can switch to the upper case mode, lower case and the numeric keypad by pressing
successively on the # key.
To subscribe your handset to a DECT system, perform the following steps.
Menu
Select
Register
Select
Ok
Select
If there are no more free slots, you have to replace an existing system to add a new one.
Park
Save
OR
Skip
PIN code:
Ok
Network
name
Save
Save
OXE/OXO
Access MENU
Access the handset settings menu
Select the tab: Connectivity
Place on cursor (highlight) : Register
Enter the PIN Code (The default is 0000)
Select an empty slot or an existing system which will be replaced
Use a PARK code system ID if more than one DECT system overlaps in your location.
If only one DECT system is available, make no entry, and press the Skip soft key.
If only one system is available
Enter the PIN Code (The default is 0000)
Enter the system name
Enter the phone number assigned to your handset
Select the system
Once recording is complete, the set automatically switches to idle mode.
Other
28
7