Switching On/Off Your Telephone; Install A Bluetooth Device (Pairing) - Alcatel-Lucent 500 DECT Handset OmniPCX Office User Manual

Battery charge
Recharge your telephone battery regularly. The telephone can be on or off when recharging the
battery. If the telephone is to remain unused or out of its charger for several weeks, remove the
battery and store it separately.
The phone battery or the spare battery pack is fully charged when the charger LED (white) is off.

Switching on/off your telephone

2.3
Switching on your telephone
Long press
CLR
Long press on the on/off-hook key until the confirmation pop-up appears.
Switching off your telephone:
Press the switch on/off key (long press).
Confirmation window appears
Long press
Confirm switching off
CLR
Your telephone is switched off

Install a Bluetooth device (pairing)

2.4
Before using a Bluetooth device with your phone, you must install the Bluetooth module in your
phone.
For more information, contact your installer or administrator.
Install the Bluetooth module
You must be
Turn off the handset
in possession
Slip the lock to the unlocked
of the
position
Bluetooth
Lift the battery module
module for
your phone
Battery fully charged (75% - 100%)
Battery half charged (33% - 75%)
Low battery (0% - 33%)
Battery completely discharged (0%)
Battery charge icon flashes when the phone is on the charger
Press the switch on/off key (long press).
Wait a few seconds (about 3s).
Your telephone is switched on
Insert the Bluetooth module (You
should hear a click when the module
is in place)
Installing the battery in the telephone
Turn on the handset
7