Loading A Kit - Elektron analog four Getting Started Manual

ABOUT THE TRACKS
THE SYNTH TRACKS
The synth tracks consist of track 1-4. To edit one of them, press [TRACK] key 1-4. Sounds are loaded to the synth tracks.
THE FX TRACK
The FX track controls the Analog Four internal master effects and external audio inputs. To edit the FX track, press the
[TRACK] key 5.
THE CV TRACK
The CV track is used for controlling external equipment capable of receiving analog CV and Gate signals. To edit the
CV track, press [TRACK] key 6.
EDITING THE TRACKS
The six [PARAMETER] keys open pages that are used for editing the tracks. They contain different parameters depend-
ing on the track type. Edit parameters using the
larger increments.
KITS AND SOUNDS
Kits and Sounds are the basic building blocks of the Analog Four. Kits can be regarded as a collection of Sounds as well
as other settings. A Sound is essentially a synth track patch. Sounds can be loaded to any of the synth tracks.
A Sound that has been loaded becomes a part of the active kit. Any changes made to a loaded Sound will not affect the
loaded Sound, it will affect the active kit. A pattern, controlling the playback of the kit, is always linked to a kit.

LOADING A KIT

1 Open the KIT menu by pressing [FUNCTION] + [KEYBOARD C1].
2 Use the [UP] and [DOWN] arrow keys to select LOAD KIT. Press [YES/SAVE] to open the menu.
3 The LOAD KIT menu contains up to 128 saved kits. The currently active kit is indicated by inverted graphics. Select
the kit to be loaded by using the [ARROW] keys or the
4 Once a kit has been selected, press [YES/SAVE] to load it. The active pattern will be linked to the loaded kit.
knobs. Press and turn a knob to adjust its parameter in
DATA ENTRY
knob.
LEVEL
9