Elektron analog four Getting Started Manual page 15

3 Place note trigs on the sequencer by pressing the [TRIG] keys. To add note values to trigs, press and hold a [TRIG]
key while pressing a key on the [KEYBOARD]. To add a trigless lock, press [FUNCTION] and [TRIG].
4 Press [PLAY] to listen to the sequence.
LIVE RECORDING MODE
LIVE RECORDING mode is the second method of adding trigs to the tracks. In this recording mode, the [KEYBOARD] can
be played in real time to input trigs to the tracks. It is also possible to enter parameter locks in real time.
1 Hold [RECORD] while pressing [PLAY] to enter LIVE RECORDING mode. The sequencer will start to play and the
<RECORD> LED will start to flash.
2 Enter trigs to the active track in real time by pressing the keys on the [KEYBOARD].
3 Press [PLAY] to exit LIVE RECORDING mode while keeping the sequencer playing. If LIVE RECORDING mode is active
and [REC] is pressed, GRID RECORDING mode will be entered.
4 Press [STOP] to stop both the recording and the playback of the sequencer.
SEQUENCER FEATURES
PARAMETER LOCKS
Parameter locks allow trigs to have their own unique parameter values. For example, all note trigs of a synth track can
have different pitch or filter settings. Parameter locks can be applied to all types of tracks.
1 In GRID RECORDING mode, press and hold the [TRIG] key of a trig to apply parameter locks.
2 Adjust the parameters you want to lock using the
the locked parameter and the locked parameter value will be displayed. The <TRIG> LED of the locked trig will begin
to flash rapidly, indicating the trig now contains a parameter lock.
3 Remove a single parameter lock by holding [TRIG] + pressing the
removing a note trig and entering it again, all parameter locks will be erased from the trig.
In LIVE RECORDING mode, turn a
accordingly and trigless locks containing the locks will be placed on the sequencer steps not containing note trigs.
TRACK TRANSPOSE
Tracks can be transposed in real time. The tracks that will be affected by this functionality are set in the NOTE SETUP
menu, which is accessed by pressing [FUNCTION] + [NOTE]. The TRK TRANSPOSABLE setting in this menu needs to be
activated for the track to be affected by the transpositions.
To transpose, press and hold [TRANSPOSE] + a [KEYBOARD] key. Select a different octave range to transpose to by press-
ing the [UP] or [DOWN] arrow keys.
If you press [FUNCTION] + [TRANSPOSE], the transpose lock functionality will be activated. Transpose lock is shown by
a full-bright <TRANSPOSE> LED. When this function is activated, the [TRANSPOSE] key will act as if constantly pressed,
enabling one-handed transpositions when pressing the [KEYBOARD] keys.
DATA ENTRY
knob to input parameter locks to the active track. Note trigs will be locked
DATA ENTRY
knobs. The graphics in LCD will become inverted for
knob of the locked parameter. By
DATA ENTRY
15