Elektron analog four Getting Started Manual page 7

SCREEN NAVIGATION
When you enter a menu or sub-menu, navigate using the [ARROW] keys [UP], [DOWN], [LEFT] or [RIGHT].
1 The
knob can be used to quickly scroll through menus and lists.
LEVEL
2 [YES/SAVE] is used to affirm, select, enter sub-menus and tick/untick boxes.
3 [NO/RELOAD] is used to negate, deselect or go back one or more steps.
EXPERIMENTING WITH PATTERNS
The Analog Four is equipped with several preset patterns, kits and Sounds. To immediately start experimenting with the
Analog Four, just follow the instructions below.
1 Switch on the Analog Four.
2 Press [PLAY] to listen to pattern A01.
3 Select pattern A02, which is the second demo pattern, by first making sure bank group A-D is selected. The <BANK
GROUP> indicates the selected bank group. If A-D is not selected, press the [BANK GROUP] key.
4 Pressing [BANK A/E] + [TRIG] key 2 will make pattern A02 play once the currently playing pattern finishes. Pattern
A03 is selected by pressing [BANK A/E] + [TRIG] key 3 and so on.
5 Mute tracks by pressing [FUNCTION] + the [TRACK] key of the track you want to mute. Unmute by repeating the
procedure.
6 Press [STOP] to stop playback.
PERFORMANCE MODE
The PERFORMANCE mode makes it possible for the
parameters at once. These parameter mappings are called a parameter macro.
1 Make sure a pattern is playing.
2 Press the [PERFORMANCE] key to access PERFORMANCE mode.
3 Turn the
DATA ENTRY
ADJUSTING PARAMETERS
Each track contains six PARAMETER pages. There parameters affecting the sound of the track are found.
1 Make sure a pattern is playing.
2 Press the [TRACK] key of one of the four synth tracks.
3 To change the cutoff of the ladder filter, press the [FILTERS] key. The FILTERS page will open. The parameter labelled
FRQ changes the cutoff of the ladder filter. Turn
4 Try out the rest of the PARAMETER page parameters to experiment with the sound shaping possibilities.
5 To reload the Sound to its original state, press [NO/RELOAD] + [KEYBOARD D1].
6 To reload the whole kit to its original state, press [NO/RELOAD] + [KEYBOARD C1].
knobs and listen how the sound of pattern changes.
knobs to control several PARAMETER page
DATA ENTRY
knob A to change the parameter value.
DATA ENTRY
7