Concept2 SkiErg User Manual page 16

MAINTENANCE
A Description of Cord Wear/Damage:
• The cords consist of a solid braid (not a covering over inner fibers). Over time the surface will
show "fuzzing." If this "fuzzing" becomes worse in a localized spot on the cord it is time to
replace the cord. See photo at right.
• The bungee cord consists of elastic fibers encased in a braided covering. Some "fuzzing"
of the covering is to be expected, but once the white fibers are exposed the cord should be
replaced immediately.
Inspect the Fasteners
Check that all fasteners are tight and have not loosened during use. If your SkiErg is wall mounted,
pay particular attention to the wall mount fasteners.
Inspect the Top Bracket Pulleys
Check that the pulleys spin freely in the housings and that the pulley housings swing freely in the
pulley brackets.
Pulley Bracket
As needed
• Clean grips and straps after each workout. Use a mild soap or cleaning product.
• Clean surfaces of the SkiErg with any household cleaner. DO NOT spray any fluid onto the
monitor.
• Dust and lint can collect inside of the flywheel enclosure. This buildup can restrict airflow
reducing the resistance of the fan. The outer cover of the fan enclosure can be removed for
cleaning by removing the four screws connecting the cover halves. See illustrations at right.
Pulley
Pulley Housing
16
1210