Section 1 - Product Overview
1
Reset Button
2
WAN LED
3
LAN LEDs 1-4
4
WPS Button
5
Signal Strength LED
6
VoIP LED
7
3G LED
8
4G LED
9
SMS LED
10
WLAN LED
D-Link DWR-922 User Manual
Hardware Overview
Front View
1
5
Press this button with an unfolded paperclip and hold for ten seconds to reset the device.
Will be lit if an Internet connection is established, and will blink when data is being transferred.
Will be lit if an Ethernet connection is established, and will blink when data is being transferred.
Press this button to initiate a new WPS connection. See Add Wireless Device with WPS on page 18 for details.
Will blink red if there is no SIM card / signal. Solid red/amber/green indicates the signal strength.
Will be lit if a VoIP connection is active.
Will be lit if a 3G connection is established, and will blink when data is being transferred.
Will be lit if a 4G LTE connection is established, and will blink when data is being transferred.
Will be solid green if the SMS inbox is full, or blinking if there is an unread new SMS message.
Will be lit if the wireless function is enabled, and will blink when wireless data is being transferred.
2
3
6
7
8
9
4
10
3